Tuoba – Heavy-Duty Brake Pad & Lining Expert Since 2006
COMMERCIAL FLEET BRAKE SOLUTIONS

Fleet Brake Pads & Linings for Predictable Uptime and Cost per Mile

We supply brake pads, brake linings and drum brake shoes for truck, bus, trailer and van fleets. Each part is matched to your vehicles, routes and loads, tested on a few vehicles first, then reordered to the same approved spec.

Built around fleet operating data

Brake Pads for Fleet Vehicles, Chosen by Maintenance & Operating Data

The cheapest pad is rarely the cheapest per mile. Downtime, labor, how often parts are replaced, rotor or drum wear and wrong fitment all add to what a fleet really pays for brakes. A brake part should fit your maintenance plan, not force a new one.

As a fleet brake pad and brake lining supplier since 2006, we start with your vehicle list, axle positions, routes, loads, annual mileage, current part life and WVA, OE or FMSI numbers. Then we recommend a product and a test plan. Our range covers 500+ commercial vehicle brake pads, 1,000+ brake linings and 300+ brake shoes, plus 3,000+ passenger car brake pad models for vans and light trucks. We are an OE supplier to SHACMAN and FAW Jiefang, CIMC is a strategic partner, and we supply 110+ brand customers in 50+ countries. We aim for mid-to-premium parts with steady wear and test records you can check.

Discuss Your Fleet Requirements
Fleet purchasing priorities

Control Fleet Brake Cost, Service Life & Maintenance Intervals

A fleet evaluation ties each part to results your maintenance team can track and compare.

01 · UPTIME

Reduce Off-Cycle Maintenance Risk

A pilot on selected vehicles shows how evenly the parts wear and how long they last, before the whole fleet switches.

  • Fits your planned maintenance schedule
  • Wear pattern and remaining thickness checks
  • Fitment and hardware confirmed before install
  • Replacement interval tracking
02 · DUTY CYCLE

Match Heat and Wear to the Route

Highway long-haul, city stop-and-go and severe-duty work heat and wear brakes in very different ways.

  • Load and route profile
  • Braking frequency and brake temperature
  • Noise, dust and driver comfort targets
  • Rotor and drum compatibility
03 · CONSISTENCY

Standardize Approved Fleet Parts

Once a part is approved, every repeat order and every depot gets the same product.

  • Part number and batch traceability
  • Incoming material and process checks
  • Inspection and release records per batch
  • Change control and corrective action
Fleet types & duty cycles

Match Commercial Vehicle Brake Pads to Fleet Duty Cycles

One fleet often needs more than one friction material. The right choice depends on vehicle class, axle, route, load, braking frequency and your maintenance target.

01 · LONG HAUL

Freight & Logistics Fleets

Long service life, steady wear and fade resistance on long descents. Correct cross-references across truck brands matter most here.

02 · STOP-AND-GO

Bus & Urban Transit Fleets

Frequent stops build heat fast. Pads need stable friction, low noise and low dust, with service intervals you can plan around.

03 · SEVERE DUTY

Tanker & Heavy-Load Fleets

Heavy loads, steep grades and high brake temperatures. We review the route and load before choosing a heavy-duty friction material.

04 · MIXED FLEET

Delivery Vans & Service Vehicles

Vans and light trucks from several brands and sites. We map every model to one parts list, so each depot orders the same way.

Common fleet vehicles we match parts for include Freightliner Cascadia, Volvo VNL, Kenworth T680, Peterbilt 579, Scania R Series, MAN TGX, Mercedes-Benz Actros, Ford Transit and Mercedes-Benz Sprinter. Brake hardware changes by model year and axle, so final fitment is always confirmed from your vehicle data and part numbers. For bus and refuse fleets, see our bus brake pads and refuse truck brake pads pages.

Fleet brake products

Fleet Brake Pads, Brake Linings & Brake Shoes for Commercial Fleets

Pick the product family first. Then we confirm fitment, friction material, hardware and testing against your duty cycle. Not sure which material? Read ceramic or semi-metallic brake pads for trucks.

Brake PadsBrake LiningsDrum Brake Shoes
01 · Disc brake

Commercial Vehicle Brake Pads

Air disc and hydraulic disc brake pads for vans, buses, medium- and heavy-duty trucks. Available in NAO, low-metallic, semi-metallic and ceramic. Ceramic runs quieter and cleaner, but heavy trucks usually need semi-metallic or low-metallic to handle heat.

Explore Fleet Brake Pads
02 · Drum brake

Heavy-Duty Brake Linings

Truck and trailer drum brake linings, matched by size, drum, route and load. For fleet programs the linings come fitted on new brake shoes. Listed lining models carry ECE R90 approval, with FMVSS 121 test data for heavy-truck linings.

Explore Fleet Brake Linings
03 · Assembly

Commercial Drum Brake Shoes

New brake shoe assemblies for trucks and trailers, including common 4515, 4707 and 4709 types, with the agreed lining and hardware. New assemblies only, no remanufactured shoes.

Explore Fleet Brake Shoes
A faster route to the right product

Start a Fleet Brake Review with Your Vehicle & Operating Data

A vehicle list or a current part number is enough to start. More operating data gives a better pilot plan.

Severe-duty review

Match the Product to the Route

Long descents, hazmat tankers, heavy loads or constant stop-and-go: we look at the route and braking cycle before we confirm the part.

Submit Fleet Operating Data
Fleet validation & rollout

Fleet Brake Testing & Validation Before Wider Rollout

Check fitment and road results on a small group of vehicles before you roll out to more routes, depots or the whole fleet. Our guide to commercial vehicle brake pad testing explains the lab tests behind each part.

01

Fleet & Part Review

Confirm vehicles, axle positions, part numbers, annual mileage, routes and the current brake problem.

02

Product Route & Pilot Plan

Choose the product family and friction material. Agree the pilot vehicles, routes and how results will be compared.

03

Fitment & Field Validation

Fit the parts on the pilot vehicles. Record fitment, wear, noise, driver feedback and inspection results.

04

Result Review & Approval

Compare service life and maintenance cost with your current parts before you approve.

05

Controlled Fleet Rollout

The approved part number goes into repeat supply with batch records and a reorder plan. Lead time is usually 15 to 45 days.

Fleet pilot validation

Fleet Pilot Sample Support

Fleet projects can start with samples or a small pilot batch. Samples ship by DHL within 72 hours.

Fleet brake TCO assessment

Fleet Brake Cost per Mile & Total Maintenance Cost

Compare the total maintenance cost, not just the unit price. A useful cost-per-mile review combines real field data with parts and shop costs. Our fleet brake pads guide covers TCO in more detail.

Current Fleet Baseline

  • Fleet size and vehicle mix
  • Current brake product and service life
  • Annual mileage and replacement frequency
  • Labor time and parts cost
  • Unplanned maintenance events

Operating Conditions

  • Long-haul, urban or mixed routes
  • Normal, heavy-load or severe duty
  • Road gradient and climate
  • Braking frequency and axle position
  • Rotor or drum observations

Pilot Comparison

  • Fitment and installation feedback
  • Measured wear and inspection intervals
  • Noise, dust and driver feedback
  • Maintenance time and component impact
  • Recommended rollout and replenishment plan

Brake cost per mile = (parts + labor + rotor or drum cost for one brake job) ÷ miles between brake jobs. We do not promise a fixed savings percentage. Any estimate is based on your current baseline and verified pilot results. Request a Fleet TCO Review

IATF 16949 & ISOIATF 16949 and ISO 9001 quality systems. ISO 14001 and ISO 45001 certified.
Fitment & Test RecordsFitment checks and test data agreed per part and pilot plan.
ECE R90 / E-markListed lining models carry ECE R90 approval. Other parts reviewed by market.
AMECA / FMVSS 121AMECA and LeafMark N for North America. FMVSS 121 test data for heavy-truck linings.

Certificates, test reports and approvals vary by part number, product family and target market. Tell us which documents you need during the fleet review.

Representative fleet project routes

Typical Fleet Brake Validation Scenarios

These are example project routes, not customer case studies. Results are confirmed only from each fleet's own field data.

Tanker & severe duty

Heat and Wear Review for a Heavy-Load Route

Vehicle, load, grade, current part life and inspection findings decide the candidate part and the pilot conditions.

Discuss a Severe-Duty Fleet
Long-haul logistics

Standardizing Parts Across Multiple Truck Models

We check WVA, OE and FMSI cross-references against the vehicle list, so one parts list fits every truck model in the fleet.

Submit a Fleet Vehicle List
Repeat supply

From Approved Pilot to Replenishment Planning

Approved part numbers, inspection feedback and demand by depot become one supply and reorder plan.

Plan Fleet Replenishment
Fleet brake FAQ

Fleet Brake Pad & Maintenance FAQ

How do you choose brake pads for different fleet duty cycles?

We look at vehicle type, axle position, route, load, braking frequency, annual mileage, current brake life and your maintenance target. Then we recommend a friction material and a pilot plan.

Are fleet brake pads different from standard replacement pads?

Yes. Fleet brake pads are made for more heat, heavier loads and longer service intervals. Most heavy-duty fleets run semi-metallic or low-metallic pads, while ceramic suits vans and lighter vehicles where low noise and dust matter more. A pilot on your own routes shows which one lasts longer.

Can Tuoba support heavy-duty trucks, buses, tankers and light commercial fleets?

Yes. We supply brake pads, brake linings and drum brake shoes for heavy trucks, buses, trailers, tankers, vans and light trucks. Each vehicle list and duty cycle is checked before we confirm a part.

How can our fleet compare brake cost per mile?

Add parts, labor and any rotor or drum cost for one brake job, then divide by the miles between brake jobs. Do this for your current parts and for the pilot parts, using real service records. We review your baseline before we give any estimate.

Can we test samples before wider fleet adoption?

Yes. Samples ship by DHL within 72 hours. You run them on selected vehicles and routes, and we agree the inspection schedule and pass criteria with you before rollout.

Which part references can Tuoba match?

WVA, OE and FMSI numbers, plus vehicle brand, model, year, axle position, photos or dimensions. One number can cover more than one variant, so we check dimensions before we quote.

What are your MOQ, lead time and payment terms for fleet orders?

Our MOQ is 100 sets per part number, and you can mix part numbers in one order. Lead time is usually 15 to 45 days. Payment is T/T: 30% deposit and 70% before shipment. We don't accept L/C. Send complete part details and we usually reply within 24 hours.

What compliance documents are available?

IATF 16949 and ISO 9001 quality systems, ISO 14001 and ISO 45001 certificates, ECE R90 approval for listed lining models, AMECA for North America, LeafMark N low-copper linings, GB 5763 for China and FMVSS 121 test data for heavy-truck linings. Documents are confirmed by part number and target market, so list what you need during the fleet review.

Where are Tuoba fleet brake products made?

Our office is in Hangzhou. Passenger car brake pads are made at our Ruian plant, and commercial vehicle brake products at our Ningguo plant. We have been making brakes since 2006.

Robert, Chief Executive Officer of Tuoba Auto Parts

Reviewed by: Robert, Chief Executive Officer, Tuoba Auto Parts.

Technical basis: SAE J2521, SAE J661, SAE J866, SAE J2975, FMVSS 121, UN ECE R90

Fleet project review

Request a Fleet Brake Evaluation

Send your vehicle list, current parts, routes, mileage and brake problem. We usually reply within 24 hours and tell you if anything is missing for a product recommendation, pilot plan and fleet quote.

✉
Email ›info@tuobapro.com
◉
WhatsApp / Phone ›8619154283016
⌂
Office & PlantsOffice in Hangzhou · Passenger car plant in Ruian · Commercial vehicle plant in Ningguo
Ready to start

Send Your Fleet Details

Share what you have now. More detail gets you a faster, more accurate recommendation:

  • Company name, fleet type and operating market
  • Vehicle types, brands, models, years and axle positions
  • WVA / OE / FMSI numbers, or photos of your current parts
  • Routes, loads, annual mileage and current brake life
  • Maintenance problem, pilot size and documents you need
Contact Us to Request a Fleet Evaluation