Brake Pad Solutions for OEM, Fleet & Aftermarket Partners
We make brake pads, brake linings and drum brake shoes for OEM programs, truck and bus fleets, distributors and private label brands. Send us a part number, a sample or a drawing. Our engineers match the friction material, run the tests your market asks for and keep every repeat order on the approved spec. We have been making brakes since 2006.
Commercial Vehicle Brake Pad Solutions Built Around Your Application
OEM programs, fleets, distributors and private label brands often have different priorities. Some focus on fitment and test documentation, while others care more about service life, supply consistency, vehicle coverage or repeat-order stability.
That is why we start with the application rather than only the catalog number. Send us the vehicle model, brake system, OE / WVA / FMSI number, target market and expected order volume. We can check fitment, review suitable friction material options, and confirm the relevant testing or documentation requirements.
From there, we can recommend a suitable product configuration for your program. For repeat orders, approved product specifications are carried into production with batch records and traceability controls.
Talk to Our Engineering TeamBrake Solutions by Business Type
OEMs, fleets, distributors and private label brands usually start with different needs — from drawings and vehicle fitment to product coverage, MOQ and branding. That’s why we’ve grouped the solutions below by business type.

OEM Brake Pad Manufacturing
If you’re working on an OEM project, send us the drawing, OE number, sample or performance target. We can check the fitment, friction material, backing plate and test requirements with you, then move from sample approval to volume production.
Tuoba currently supplies SHACMAN and FAW Jiefang, and works with CIMC as a strategic partner.
- Drawing or sample review
- Friction material and product development
- Testing, PPAP and volume production

Fleet Brake Pads & Linings
Fleet customers usually care about fitment, service life, downtime and whether the product has the right test support for their market.
Tell us the vehicle model, brake system, axle or application, and we can help match the brake pad or lining and check the available test documents. For North American truck applications, we can also provide FMVSS 121, SAE J661 and SAE J2975 related reports where applicable.
- Vehicle and application matching
- Test reports and compliance documents
- Sample and dynamometer testing

Distributor & Wholesale Brake Pad Supply
If you’re building a local product range, we can help you match the models that actually sell in your market instead of simply sending you a long catalog.
Our range covers 3,000+ passenger car brake pad applications, 500+ commercial vehicle brake pads, 1,000+ brake linings and 300+ brake shoes. MOQ starts from 100 sets per model, and mixed orders are welcome.
- MOQ 100 sets per model
- Mixed-model orders available
- Standard or custom packaging
- 15–45 day lead time
- Samples by DHL

Private Label Brake Pads
If you already have your own brand, we can support the product side behind it — friction material, packaging, logo marking, product data and repeat supply.
We currently support 110+ brands. Tell us your market, target price range and product positioning, and we can help match the right formula and packaging setup.
- Formula matched to your market
- Custom packaging and logo marking
- Product data and repeat-order support
Brake Products by Vehicle Application
We supply brake products for heavy-duty trucks, buses, trailers, passenger vehicles, agricultural machinery and other applications. The right product depends on the vehicle, brake system, axle and working conditions.
Start with Your Vehicle or Application
Tell us the vehicle or equipment model, brake system and part number. We can help check the fitment and available friction material options.
Disc Brake Pads, Drum Brake Linings & Brake Shoe Assemblies
Choose the brake product family first. Then we confirm the vehicle application, part number, friction material and market requirements.

Disc Brake Pads
Disc brake pads for passenger cars, trucks, buses and trailers, including heavy-duty air disc brake applications. NAO, low-metallic, semi-metallic and ceramic options are available for different vehicle models and duty cycles.
Explore Disc Brake Pads
Drum Brake Linings
Curved friction linings for drum brake systems on trucks, buses, trailers and selected special applications. Confirm the WVA or OE number, dimensions and friction grade before ordering.
Explore Drum Brake Linings
Drum Brake Shoe Assemblies
Complete new lined brake shoe assemblies for commercial vehicles, including common 4515, 4707 and 4709 types. New assemblies only; no relined cores.
Explore Brake Shoe AssembliesFor agricultural machinery, send us the equipment model and brake system so we can check the right product family.Explore Brake Pad Materials & Technology
Brake Pad Engineering & Manufacturing
Whether you’re buying for an OEM project, fleet, distribution or private label, most projects follow the same basic path — from application matching and material selection to testing, production and repeat supply.
Requirement Review
We confirm the vehicle, market, volume and key requirements.
Application & Part Matching
We check the WVA, OE or FMSI number, dimensions and application.
Material / Formula Selection
We match the friction material to the vehicle and working conditions.
Sample Development
Samples are prepared for fitment checks, testing or vehicle trials.
Testing & Validation
We test friction, wear, strength and material performance with in-house equipment.
Controlled Production
Confirmed specifications move into production with a typical 15–45 day lead time.
Repeat Supply
Repeat orders follow the confirmed specification with batch traceability.
Certificates, approvals and test documents vary by product and target market. Tell us where you sell, and we will confirm what applies to your parts.
Brake Solution Guides for Fleets, Buyers and Importers
Practical reads our team often sends to customers before a project starts.

Commercial Truck Brake Pad Thickness: Minimum Limits and Inspection Guide
When to replace, how to measure, and what uneven wear tells you about the truck.
Read the Inspection Guide
How Commercial Vehicle Brake Pads Are Manufactured Step by Step
From mixing and pressing to curing and final checks, inside a brake pad factory.
See the Manufacturing Process
What Is Brake Lining? Types, Materials and How to Choose
Lining vs pad vs shoe, material types and how to pick a grade for your trucks.
Read the Brake Lining GuideNot Sure Which Solution Fits Your Project?
Send your business type, product, vehicle and the problem you want to fix. We usually reply within 24 hours.
Brake Pad Solutions FAQ
Which brake solution is right for my business?
Go by where you start. If you have a drawing, a sample or a vehicle program, that's OEM. If you run trucks or buses and want longer pad life, that's Fleet. If you resell parts, choose Distributor. If you want your own brand on the box, choose Private Label. Still not sure? Send us a short note and we'll point you to the right person.
Can I send WVA, OE or FMSI numbers for product review?
Yes, and it's the fastest way to start. Add the vehicle, axle and market if you have them. We check dimensions and backing plate details before we quote, because one number can cover more than one variant.
Can Tuoba develop brake products from drawings or physical samples?
Yes. We work from 2D or 3D drawings, physical samples or measured dimensions. Our engineers review feasibility first, then confirm the sample plan with you.
Do you supply brake pads, brake linings and drum brake shoes?
Yes, all three. Brake pads cover truck, bus, trailer and passenger car applications. Brake linings and drum brake shoes are mainly for commercial vehicles. Our shoes are new assemblies. We don't sell relined cores.
Can you support PPAP for OEM programs?
Yes. We supply brake parts to vehicle manufacturers, so PPAP documentation is part of how we run OEM programs. The submission level and document list are agreed with your quality team at the start of the project.
Can I test samples before volume production?
Yes. We ship samples by DHL so you can check fitment or run a pilot on a few vehicles. The test scope is agreed for each project before production starts.
What are your MOQ, lead time and payment terms?
Our MOQ is 100 sets per part number, and you can mix part numbers in one order. Lead time is usually 15 to 45 days. Payment is T/T: 30% deposit and 70% before shipment. We don't accept L/C.
What test reports and certificates can you provide?
It depends on the product and your market. Our friction materials are E-Mark approved, and we can share the E-Mark certificate and COP files, FMVSS 121 reports (20K and 23K), SAE J661 friction reports including one by LINK Engineering, SAE J2975 chemical composition reports and SAE J2521 noise reports. For bus brake pads we can share test reports covering material analysis, friction coefficient and heat performance. Listed lining models carry ECE R90 approval, we have AMECA for the North American market, and our factory holds ISO 14001 and ISO 45001 certificates. Tell us where you sell and we'll send what applies.
Which markets do you ship to?
We ship to brand customers, distributors and fleets in more than 50 countries. Tell us your target market early, because certificates, labels and packaging rules change from country to country.
What should I send to start a brake project?
Your business type, product category, target market, vehicle or application, part numbers, and any performance, packaging or volume targets. Photos of the old part help too.

Reviewed by: Robert, Chief Executive Officer, Tuoba Auto Parts. Robert founded Tuoba, a family-run brake manufacturer, and has spent 20 years in brake systems.
Technical basis: SAE J2521, SAE J661, SAE J866, SAE J2975, FMVSS 121, UN ECE R90
Request a Brake Pad Quote or Sample
Tell us your business type, product, target market and vehicle. Part numbers or photos help. Our team reads every request and usually replies within 24 hours.